Portable Mini 12V DC Electric Submersible Pump For Pumping Diesel Oil Water Aluminum Alloy Shell 12L/min 38mm Fuel Transfer Pump

Description

Portable Mini 12V DC Electric Submersible Pump For Pumping Diesel Oil Water Aluminum Alloy Shell 12L/min 38mm Fuel Transfer Pump

Bullet Points:

1、Prevent Leakage: Full sealed equipment to prevent leakage and prolong service life, insulation state, low noise and fast speed, small size and light weight, easy to install and carry.
2、Prevents Rust or Corrode: The stainless steel housing is more sturdy, not easy to deform, and prevents rust or corrode. A switch is set on the oil pump power line for easy operation.
3、Stainless Steel Filter: The filter at the bottom of the oil pump is equipped with a stainless steel filter to make the extracted oil or water cleaner.
4、Easy Removal: The bottom filter is equipped with a threaded interface for easy removal, maintenance and replacement, to achieve the purpose of reuse.
5、Suitable For: Suitable for harvester, large agricultural machinery, engineering machinery, large tractor and vehicles that are inconvenient for refueling in the field and equipment and machinery that cannot get the gas station for refueling.

Specification:

Condition: 100 brand new
Project Type: oil pump
Material: stainless steel
Oil Pump Capacity: about 12L/min
Elevator: about 2-3 meters/6.6 feet-9.8 feet
Racing Speed: 8500r/min
Racing Current: 0.1A
Maximum Pump Operating Current: 0.8A
Voltage: 12V, 24V optional
Cable Length: approx. 3 meters/9.8 feet
Pump Port Diameter: approx. 16 mm/0.6 inch
Pump Body Diameter: approx. 38 mm/1.5 inches
Weight: approx. 326 g / 11.5 oz

Packing List:

1 x Oil Pump
1 x User Manual

Precautions:

1.After use, the pump should be taken out of the oil or water in time.
2.When pumping oil, you should first connect your own oil outlet hose, and then put the entire pump into clean oil or water.
3.Do not pump flammable substances such as gasoline and alcohol! Do not run the pump without load and dry.
4.The oil pump should work intermittently that is, it should be used for no more than 20 minutes at a time, and can be used continuously after stopping for 10-15 minutes. Be careful not to work continuously for a long time.
5.Confirm that the power supply voltage is consistent with the voltage marked on the oil pump, and the voltage tolerance is ±5. Pay attention to the positive and negative poles. The color of the head is random red or silver.

Notes:

Due to the lighting effects and shooting angles, there is color difference in the product, please understand.
Due to manual measurement, there is a tolerance in the product size.