Additional information
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | 787H |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
477.50 $
85 in stock
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | 787H |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
Function description of alcohol-based fuel vaporization controller for precise regulation of firepower
The controller is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition, electromagnetic pump speed regulation, etc., it can also expand external precision regulator to achieve precise adjustment of oil pump flow and Start-stop control, this function and gear position adjustment achieve the effect of no need to switch, fire with heart, start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear self-reset switch to achieve more convenient gear position control.
The controller's stability, suitability and user-friendly design are surprising and the most cost-effective controller in the alcohol-based fuel gasifier industry. Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V
3, the service life: the number of actions is not less than 100,000 times 4, heating output power: no more than 3000W
5, ignition output: AC220V, power is not more than 100W
6, electromagnetic pump output: AC220V, power is not more than 100W, full power range PWM voltage regulation 7, temperature probe: K-type thermocouple
8, operation expansion: can be connected to a word rocker switch or three-speed self-reset switch External precision regulator Wiring instructions
1, 123 wiring position is the expansion interface of the increase and decrease gear switch, which is convenient for the user to connect an external two-way rocker switch or a three-speed self-reset switch. The external switch can make the chef adjust the firepower. In the wiring, 1-3 is connected to a set of normally open contacts of the switch; 2-3 is connected to another set of normally open contacts of the switch. If the operation direction of the firepower adjustment does not conform to the usage habits when the switch is connected, the 1 and 2 wirings can be adjusted.
2, 3, 4, 5, 6 wiring is the expansion interface of the precision regulator, according to the color wiring. It is convenient for the user to finely adjust the firepower, and can also start/stop operation.
3, 7-8 wiring is connected to K-type temperature measuring thermocouple, of which 7 is connected to the negative terminal and 8 is connected to the positive terminal.
4, 9-10 wiring is connected to 220V AC power supply, leakage circuit breaker and a bipolar switch should be installed on the power supply to play a role in reliable control of total power supply and safety protection.
5, 11 – 12 wiring is connected to the heating tube, the internal switching device uses high-power relays, and uses a unique switch control technology, the heating tube power can be fully qualified within 3000W, and the life is greatly extended than the conventional.
6. 13—14 The igniter is connected to 220V AC voltage and power less than 100W. High-energy igniter or super igniter can be selected according to requirements. The current general igniter power is far less than 100W, so the conventional igniter can match.
7, 15 – 16 wiring is connected to the electromagnetic pump, the output voltage is adjustable AC voltage, due to the use of a unique microcomputer-controlled high anti-interference non-contact PWM full power adjustment technology, even when the ignition is ignited Stable output, no malfunction. Matching with commonly used imported electromagnetic pumps allows the electromagnetic pump to perform optimally. Setting instructions
The following instructions are all performed when the controller's settings are in the factory state, the controller is connected to the thermocouple, and the power is turned on. Whether other interfaces are connected or not connected does not affect the setting operation.
After the controller is powered on, all the digital tubes and LED indicators will be lighted up. You can use this opportunity to check whether there are any missing or missing lights. Finally, the digital tube displays OFF, which is the shutdown state. In this state, the setting operation cannot be performed.
Press the start/stop button in the off state, the system enters the preheating or holding state, and the red and green digital tubes respectively display the current temperature value and the target temperature value. The current temperature value is the temperature measured by the current thermocouple, and the target temperature value is the heating stop. temperature. In this state, you can perform the setting operation:
1. Modify the output power parameter of the electromagnetic pump: press and hold the setting button for about 5 seconds, the red digital tube displays d-1, indicating that the first power output parameter setting state is entered, and then press the setting button, the green digital tube displays the current output of the gear. The percentage of power, at this time press the increase and decrease buttons, the power output parameters can be adjusted between 0-100.
★ Parameter confirmation save: adjust the parameters, press and hold the setting button, the number starts to flash until the red display SAU, indicating that the parameter is saved successfully, and the system exits the setting state. The same applies to the following, and will not be described again.
★If you need to adjust other gear parameters after adjusting the first gear parameters, you can press the setting button when the green value is displayed. At this time, the green value is off and the data is temporarily stored. Press the increase/decrease button to enter d-2, d-3 and other gears in turn, and set the parameters according to the above method. Finally, press and hold the setting button until SAU is displayed, and all parameters are saved before one time.
★If the above operation does not long press the setting button and display SAU, the new parameters will not be saved. If there is no operation for a few seconds or the start/stop button is pressed, the system will exit the setting state and the system will still run according to the original parameters.
★d-1 first file default value 24; d-2 second file default value 28.2; d-3 third file default value 32.3; d-4 fourth file default value 42; d-5 fifth file default value 49.
2. Modify other parameters: Press and hold the setting button and the increase button for about 3 seconds at the same time. The red digital tube displays SP, and the bottom parameter setting state has been entered.
★ Press the minus button when displaying the SP, and display the menus Ao1, HHH, SC, ddH, odH, oPP, SPP, SoP, FHS, SEP, etc. in order.
1 SP menu is the target temperature value option; default value: 190 ° C; setting range: 130-300 ° C.
★Parameter meaning: heating to this temperature stops preheating.
★ At this time, press the setting button, the green digital tube will display the target temperature value, press the increase and decrease buttons to change the parameters, and the parameter confirmation save method is the same as before. The same applies hereinafter and will be omitted.
★ If you do not press any button for 5 seconds, the setting state will be automatically exited, and the parameter will not be memorized.
2 Ao1 menu is the ignition start temperature value option; default value: 130; setting range: 100-190 °C.
★ Parameter meaning: After reaching this temperature value, it is allowed to start work.
3 HHH menu is the high temperature protection value option; default value: 450; setting range: 400-500 °C.
★ The meaning of the parameter is: After the temperature is reached, the system automatically protects and stops the electromagnetic pump output.
4 SC menu is the error correction value option; default value: 0; setting range: ±20 °C.
★ The meaning of the parameter is: When the current temperature is found to be different from the value measured by the standard thermometer, this value can be set according to the error value to correct the current temperature value to reduce the error.
5 ddH menu is the delay ignition time option; default value: 0; setting range: 0-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will be started after the corresponding time delay.
6 odH menu is the continuous ignition time option; default value: 6; setting range: 1-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will stop after the corresponding time.
7 The oPP menu is the boot gear option; the default value is 2; the setting range is 0-5.
The meaning of the parameter is: the output power gear value of the electromagnetic pump at the time of starting.
8 SPP menu is the shutdown gear option; default value: 1; setting range: 0-1.
The meaning of the parameter is: 1 is automatically returned to the 2nd gear after shutdown, and then the boot is 2nd gear. 0 is to keep the original gear after the shutdown, and then the original gear is activated.
9 SoP menu is the startup mode option; default value: 1; setting range: 0-1.
The meaning of the parameter is: when the parameter is 0, the system can only be started by pressing the start/stop button or by the precision adjuster; when the parameter is 1, the system adds the function that can be started by pressing the add button, the rocker switch or the right-hand precision adjuster. .
10 FHS menu is soft and hard start option; default value: 0; setting range: 0-1.
The meaning of the parameter is: 0 is a hard start, that is, booting directly from the start gear. 1 is a slow start, that is, it automatically rises from the 2nd gear slowly when it is turned on, until it increases to the gear position before the shutdown. Slow start is only valid when the SPP parameter option is 1.
11 SEP menu is the fine pitch step option; default value: 1; setting range: 1-20.
The meaning of the parameter is: the adjustment amount corresponding to the minimum angle of rotation of the external precision regulator can also be understood as the speed adjusted during rotation.
3. Restore the factory settings: the controller is powered off, press and hold the minus button and turn on the power at the same time. Press and hold the setting button when rEr is displayed. The display will flash to SAU and the factory setting will be restored successfully. All the parameters that can be set are returned to the factory. status.
Working process: described under the premise of factory setting
Power on for about 5 seconds to complete the power-on process and enter the OFF state. Press the “Start/Stop” button to enter the warm-up state, display the current temperature and target temperature and the gear position. The output of the heat pipe has an output to start heating, and the preheat lamp lights up. When the temperature reaches 130 °C, the running light starts to flash, indicating that you can start the vaporization ignition by pressing the “Start/Stop” button or the key. After the start, the running light will turn to the normal light, and the ignition and electromagnetic pump will start to output and simultaneously ignite and vaporize the light. On, after 6 seconds, the ignition output stops, the ignition lamp also goes out, and it enters the combustion state. At this time, there is still output at the output end of the heating pipe, and the preheating lamp is still lit until the current temperature reaches the target temperature to stop the heating output and extinguish the preheating lamp.
After the current temperature reaches the target temperature, if the operation is not started by pressing the “Start/Stop” button, the system enters the thermal insulation working state, and the heating and heating is automatically performed. The temperature of the burner is always maintained near the target temperature, ready to start working.
During the combustion process, press the “Increase” button to gradually increase to the maximum gear position. Press the “Decrease” button to gradually decrease to the minimum gear position, then reduce the work stop. Press the “Add” button to turn it on again.
After the machine is stopped, press the plus button, rocker switch or precision adjuster to start the machine. It is started from the gear position before stopping.
After the machine is stopped, press the start/stop button or press the precision regulator to start it from the default gear position of the system.
Press and hold the “Start/Stop” button for about 3 seconds during the warm-up or combustion work, and the system will enter the OFF state. Precautions:
★ The temperature value does not rise and fall during the heating process, indicating that the polarity of the thermocouple is reversed.
★ When the highest-grade setting value is too large and the pump oil exceeds the vaporization capacity of the burner, flame instability will occur.
★When the starting temperature setting value is too low, the flame will be unstable due to insufficient vaporization.
★The controller adopts the instrument structure design, and its structure itself does not have waterproof function. It is suitable for being embedded in the control box panel. It is required to have the sealing structure and related sealing measures to ensure that the circuit will not be damaged due to moisture ingress.
★ If you find that the flame is unstable when you just click it, you can set the ignition to delay a few seconds to start the ignition, and at the same time, raise the starting temperature appropriately, that is, try to make the vaporization working state stable and re-ignite. Experience has shown that this effect will be much better. .
Infrared beam debugging: a. The receiving head with a glass window at the side end of the aluminum infrared component has a built-in infrared receiving element and a status indicator. The light is always on to indicate that the correct infrared signal is received, indicating that the infrared light is not blocked, and the direction of emission and reception is basic Normal, in the effective range. On the contrary, the flashing light indicates that no infrared signal is received, indicating that the infrared light is blocked or emitted by the pot, and the receiving direction is not within the effective [...]
83.75 $ Add to cartLabel change notice: GM103 is changed to SHRN322 First, the wiring instructions: N: ignition output S: Signal detection Green: Power 220 volts Blue: power sharing line Orange/Blue: PV gas solenoid valve Red/blue: L2 combustion work indicator White/blue: L1 flameout ignition indicator Yellow/blue: siren Black: ground wire Second, the function: Size: 127mm x 70mm x 42mm Mounting hole distance: 118mm aperture φ 5mm Weight: 400g Input voltage: AC220 AC185~AC250V Ignition: output high voltage above 16KV Re-ignition: automatic ignition after flameout Indicator light: flameout ignition indication, combustion work indication, automatic exchange Automatic alarm: Exceeding the ignition time 22 seconds, it will automatically [...]
83.75 $ Add to cartZQ1 alcohol based fuel steam controller system description First, the configuration: 220V electromagnetic pump; 220V fan; super ignition; start button compatible switch; wind pressure switch; lower water level probe; ignition needle; fire needle; status indicator. Second, the applicable products: Alcohol based fuel steam generator Third, the work process: When the start button is turned on, the fan runs immediately. When the wind pressure switch is turned on, the ignition starts and the 220V electromagnetic pump is started, and the alcohol-based fuel is sprayed. When the fire detector detects the flame controller, the ignition is stopped, and the system enters the [...]
96.25 $ Add to cartM1 electrification controller New M1 gasification controller M1E type with belt rocker switch control M2 type with flameout protection M3 controller with control fan M5 type with flameout protection and fan control First, M series electric vaporization controller description System parameter setting method: Press and hold the setting button to enter the system parameter setting, turn the knob to select the desired menu, press the setting button to display the value, turn the knob to adjust the value, and then press and hold the setting button until the SAU is displayed, indicating that the saving is successful. Note: If you [...]
98.75 $ Add to cartFunctional description of infrared anti-air burning controller for commercial stoves This controller is used on commercial gas stoves, which can realize infrared control. Controller working process: Turn on the power switch, the controller starts to ignite, and the solenoid valve is opened at the same time. After 12 seconds, the ignition stops and enters the burning state. At this time, the pot sensor composed of the infrared emitting head and the receiving head detects whether there is a pot on the stove, such as If the infrared light is blocked, it means there is a pot and keep the burning [...]
121.25 $ Add to cartN series atomization controller description This series of controllers is used in conjunction with a methanol spray burner for ignition and fire regulation. With the extinguishing function, it can be used in places such as steaming furnaces. System parameter setting method: Press and hold the setting button to enter the system parameter setting, turn the knob to select the desired menu, press the setting button to display the value, turn the knob to adjust the value, and then press and hold the setting button until the SAU is displayed, indicating that the saving is successful. Note: If you do not [...]
177.50 $ Add to cartBullet Points: Wind-resistant Design: The lighter is lightweight and well-suited for inclement weather, thanks to the splash-proof and wind-resistant design. Suitable for outdoor use. Rechargeable USB Lighter: The lighters can be used long times on a single charge of 60 minutes, which displays real-time battery volume. It is reusable and economical. Multiple Safety System: There is a safety lock to avoid accidental ignition. With intelligent control module, overcharge protection, overheat protection, and short circuit protection. Rotatable Neck: The flexible neck of our lighter allows you to keep away your fingers and hand from the flames. Our candle [...]
Description: Features: 1 out 1 and 1 out 2 can be freely used, can be used. This product is a piezoelectric igniter, the external material is PP plastic, mainly used in gas stoves / ovens, with an ignition needle to play an ignition role. Specifications: Item Type: Piezo Spark Ignition Set Material:Plastic Cable Length: 1 m/3.3feet Output Terminals: 2.3 mm/0.09inch Installation Hole: 18 mm/0.71inch Output Voltage: ≥18KV3PF Type: 1 Out [...]
Features: Brand New and Never used Parts. Made by Premium Quality Material. Extremely Durable Aftermarket Part. Easy to install and prefect replacement for original parts. Compatible with: PelPro, Pleasant Hearth PelPro PP130 PP130-B PP60 PP60-B PP70 PPC90 Cast Iron TSC90 Cast Iron Pleasant Hearth PH35PS PH50CABPS PH50PS Specifications: Watts: 300 Length: 4 7/8″ Total diameter: 3/8 diameter Anti-seize Threading Connectors: Male Spades Replace part number: SRV7000-660-AMP High Temperature Wire-Fiberglass insulation Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications over stranded Grade A nickel wire. Heat Shrink used on solder joints to [...]
This product USB connection only for charging, can be connected to a computer, Cell phone chargers and other charging on any output voltage DC5V, output current is less than 3000MA charger. Once charged completely it will hold a charge long enough to light up a cigarette up to 100-200 times on that charge. Rechargeable lithium battery,cycle Charging. Windproof lighter.It lights in any type of weather,wind doesnt affect it at all,neither does rain. Flameless,no gas needed,environmental protection and safety.Small and lightweight.Perfect travel gadget. It has a fashion outlook,that will make you to be very attractive in the group. Material: Metal [...]
Silicone Soft Anti-Lost Cover Keychain Locator Tracker Description: 1. Exclusive Design: This silicone case is specially designed for Samsung Galaxy SmartTag Bluetooth Tracker.2. Premium Material: Made of high-quality silicone material, soft and comfortable, wear-resistant and nontoxic, durable.3. Fully Protect Your Device: This protective case can protect your device from scratches, bumps, damages and so on.4. No Interference: Available to all ports and functions without removing the case.5. Available Colors: Multiple available colors to meet your needs, add fashion and beauty to your Name: Protective Case for Samsung Galaxy SmartTag Tracker Material: SiliconeSize: about 45.5 x 12 x 44.5mm/1.79 [...]
1 Slot Charger for 16340 14500 18650 26650 3.7V Rechargeable Lithium Battery Smart Charger USB Fast Charge LED Display Feature: USB charging. Comes with USB cable for charging, low voltage, safe, can be connected to mobile phone chargers. It is simple and convenient to charge computers, power banks, etc. Telescopic spring. The negative pole of the slot is designed with a retractable spring, which can charge lithium batteries of various specifications such as 18650, 18490, 14500, 16340, and 10440. Smart Protection. Using intelligent IC, full automatic stop. And with output short circuit, anti-battery reverse connection [...]
Description: 100 Brand New and High Quality! Please note that this product is not a WiFi controlled smart home product, it is a RM 2.4G controlled smart home product! APP: eWeLink Say bye bye to the router Still worrying about WiF without 2.4G band? Are you crazy about pairings that often fail with unstable signals? BASIC-2.4G is based on the Bluetooth protocol. As long as the mobile phone has Bluetooth function, long press the device pairing button for three seconds to achieve APP/remote pairing, so that novices who have no experience in smart home use need not worry about [...]
XIAOMI Mijia Bluetooth Thermometer 2 Wireless Smart Electric Digital Hygrometer Thermometer Work with Mijia APP Without Battery Description: 1. Home hygrometer, data can be clearly read in various brightness and angle. 2. High sensitivity and accurate sensirion from Switzerland, sense subtle change of temperature and humidity a breath away. 3. An expression to spell over comfort level, cute and simple. 4. Low consumption screen, a CR2032 button battery for one-year. 5. Built-in advanced Sensirion temperature and humidity sensor, temperature accuracy: 0.1 degrees, humidity accuracy: 0.1 percent RH 6. Via Mi app to switch on humidifier when indoor humidity is too [...]
The United States customers attention: When you select Ship From United States , the following addresses will not provide delivery service: Hawaii, Alaska, Puerto Rico, Guam, APO, DPO, FPO, etc . Recommend you to choose Ship From China .Thank you!!! Clientes de España atención: Cuando selecciona Enviar desde España , el servicio de entrega no está disponible en los siguientes códigos postales: 35000-35999 38000-38999 Se recomienda que elija Enviar desde China . ¡Gracias! ! ! Double Handle Chargers Dual USB Charging Dock Station Stand for PS 4 PS4 Wireless Controller Feature: 1. It can also be [...]
BRAND NEW MR9 PX625 Battery Converter Adapter The ideal solution for many cameras such as the Olympus OM1, Rollei 35, Canon F1, Yashica 124G, etc that used the original PX625 1.35V battery. But will not fit Leica M5 Todays equivalent to the PX625 battery is the PX625U. It is the same size and shape, but the voltage is 1.55v - which means that the battery will give an over-voltage and would give incorrect meter readings. One of the solutions is to buy a Weincell PX625 Battery, which at around £ 6.99 can make running your camera [...]
48.23 $ Add to cart100Original Lens Accessories For GoPro Hero11 Hero10 Hero 10 Hero9 Hero 9 Wide Angle MAX Lens Components Note: As the original outer packing box is damaged during transportation, the product does not carry the original outer packing. We send the package in our own packaging. Product Description Max HyperSmooth for unbreakable video stabilization up to 2.7K60 Ultra-wide angle 155˚ FOV for enhanced perspective and improved depth of field Horizon lock keeps your videos on the horizontal axis, even if your camera rotates a full 360° [...]
100 Original New LCD Display Screen Assy With Touch For Gopro Hero 5 Camera Repair Parts About Us Our company is located in China,committed to digital cameras and camcorders SLR camera repair parts.Many of our products are not uploaded on my store,if you are interested in the products about camera parts, please feel free to contact us! About Wholesale If you desire to purchase a large quantity goods from us, you can directly contact us via message.Please specify the model , brand, name [...]
16A Wifi Smart Plug Socket EU with Power Monitor, Smart Life App Control, Voice Timing Functions, Works with Alexa Google Home, No Hub Required Main Feature App Remote Control Using your smartphone or tablet remotely control the smart wifi power plug by free app Smart Life or TuyaSmart from anywhere at anytime. Easily to control your home appliances. Power Monitor&Timing Function This smart power plug could provide real time reports, on how much energy your home appliances consume. It is very good for you to set up a time schedule to turn on/off your devices automatically by app. Helping [...]
QC 3.0 USB To DC 12V 1.5A 5.5x2.1mm Step Up Cable Power Boost Line For WiFi Router LED Strip and more 12V DevicesOOTDTY standard USB input is 5V,5.5x2.1mm port output is 5V,when QC3.0 USB input,5.5x2.1mm output is 12V,your USB adapter must have QC 3.0 output,standard USB input,output is 5V,can not Step Up to 12V.2. With this cable, you can connect your power bank to router. Thus, when power cut, you can use your qc3.0 USB power bank to supply your router.3. Use this cable, you can supply your car air purifier LED strip light by power bank4.For 12V [...]
SMART WIFI PLUGEU ITEM DESCRIPTION App Remote ControlIt is easy to connect the device with your smart phone or tablet and then control the plug anywhere and anytime according to your own requirement via Smart Life app or Tuya Smart app. Enjoy your convenient smart life whether you are on vacation/business or at home. Power MonitoringThis smart power plug can provide a real-time power consumption meter, and you can know real-time reports on how much energy your appliances consume.Timing FunctionTimer can be easily set according to your own needs. It is more convenient for you to set up a schedule [...]
55.09 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.