LILYGO® TTGO T-Beam V1.1 ESP32 NEO-M8N GNSS IPEX LoRa SX1268 433Mhz SX1262 868Mhz 915Mhz Wireless Module WiFi Bluetooth Board

KSD301 250V 10A 95°C Normal Close NC Temperature Controlled Switch Thermostat

85774 Ratón y teclado KSD301 250V 10A 95 °C Cierre Normal NC temperatura controlada interruptor termostatoAltavoz OOTDTY Descripción:100 nuevo y de alta calidadAmpliamente utilizado para control de temperatura o protección de electrodomésticos eléctricos.Se cierra hasta que la superficie alcanza los 95 grados Celsius, luego el interruptor se abre.Propósito, reinicio automático, bajo costo, gran capacidad, termostatos de corriente electrodomésticos, PC, hornos de microondas, planchas, refrigeradores, horno electrónico, unidad de calefacción, café, calentador de agua, etc.Tipo de acción: Cierre Normal N.C.Temperatura de acción: 95 Â 250V 10AResistencia de circuito 50 MohmResistencia de aislamiento 100 MohmTamaño: 3,3x2,1 cm/1,3 pulgadas x 0,8 [...]

LILYGO® TTGO T-Beam V1.1 ESP32 NEO-M8N GNSS IPEX LoRa SX1268 433Mhz SX1262 868Mhz 915Mhz Wireless Module WiFi Bluetooth Board

T-Beam V1.1 SX1262 IPEX NEO-M8N GNSS Introduce: T-Beam V1.1 SX1262 IPEX NEO-M8N GNSS Version, change GPS / LoRa chip and LoRa antenna based on T-Beam V1.1. LoRa chip using Semtech SX1262 LoRa RF transceiver chip design, works in the 868/915MHz ISM frequency band, integrates a highly stable TCXO 32MHz crystal oscillator, half-duplex transceiver module, power up to +22dBm, to -139dBm receiving sensitivity. The LoRa antenna interface is changed from SMA to IPEX , which is more convenient to store. GPS chip using Semtech NEO-M8N GNSS chip design, also support GPS Beidou GLONASS, stronger positioning signal, The [...]

F5305s Pmos Pulse Trigger Switch Board Fet Mos Field Effect Transistor Switch Module 3v 5v 12v 24v 36v

F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital high and low level. Can be connected to MCU IO port, PLC interface, DC power supply, etc., 3. Input signal voltage: 3V~24V; current: about 5mA. 4. The output terminal can control high-power equipment, motors, bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. 5. Output controlled voltage: 5V~36V. Current: less than 5A, more than 5A need to add a heat sink, [...]

2S-6S B6 B8 A6 Lithium Battery Balanced Charger Expansion JST XH Adapter Board

2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging Specification: JST XH Balance Charging Adapter 6S Expansion Board Support 2S-6S lithium battery Suitable for MEGA Power 860 and 960 chargers Dimensions: 60 x 25 x 15mm Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. [...]

1pcs MH-SR602 MINI Motion Sensor Detector Module SR602 Pyroelectric Infrared PIR kit sensory switch Bracket for Arduino Diy

3.3V Wireless Socket Module Adapter Plate 8Pin 24L01 Smart Electronic Board

3.3V Wireless Socket Module Adapter Plate Board 8Pin 24L01 Smart Electronics Module Feature: The working voltage of wireless module is generally 3.3v, while that of 51 single-chip computer is 5V. This module is convenient for the cooperation between wireless module and 51 single-chip computer system board. Specification: Pin value: 8Pin Product size: 25 x 18 x 9mm/0.98 x 0.7 x 0.35 Product weight: 2g Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks [...]