Additional information
Model Number | INA226 |
---|---|
DIY Supplies | ELECTRICAL |
Brand Name | GREATZT TZ |
Origin | Mainland China |
Certification | NONE |
Functions | Electronic Module |
Range of application | Switch And Sensor For Arduino STM |
44.19 $
99961 in stock
Model Number | INA226 |
---|---|
DIY Supplies | ELECTRICAL |
Brand Name | GREATZT TZ |
Origin | Mainland China |
Certification | NONE |
Functions | Electronic Module |
Range of application | Switch And Sensor For Arduino STM |
Description
The INA226 is a current shunt and power monitor with an I2C™- or SMBUS-compatible interface. Thedevice monitors both a shunt voltage drop and bussupply voltage. Programmable calibration value,conversion times, and averaging, combined with aninternal multiplier, enable direct readouts of current inamperes and power in watts.
The INA226 senses current on common-mode bus voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device operates from a single 2.7-V to 5.5-V supply, drawing a typical of 330μA of supply current. The device is specified over the operating temperature range between –40°C and125°C and features up to 16 programmable addresses on the I2C-compatible interface
Features
Senses Bus Voltages From 0 V to 36 V
• High-Side or Low-Side Sensing
• Reports Current, Voltage, and Power
• High Accuracy:
– 0.1 Gain Error Max
– 10 μV Offset Max
• Configurable Averaging Options
• 16 Programmable Addresses
• Operates from 2.7-V to 5.5-V Power Supply
• 10-Pin, DGS VSSOP Package
Applications
• Servers
• Telecom Equipment
• Computing
• Power Management
• Battery Chargers
• Power Supplies
• Test Equipme
Pin Description
VBUS: bus voltage input
SDA/SCL: IIC bus data and clock signal lines
ALERT: Multi-function alarm output
A0/A1: IIC address line
IN+/IN-: non-inverting analog input, inverting analog input
1/2pcs Billing Meter Digital Display Multifunctional Billing Sockets High-resolution Intelligent Biller for Electrical Equipment Feature: 1. Real-time Monitoring: The measuring socket supports the measurement of parameters such as voltage, current, accumulated electricity, accumulated electricity bills, and current. 2. Only Two Function Buttons: Mode and up. The function interface is concise and clear, easy to understand and adjust. There is a reset hole in the middle. If you need to reprogram, just insert a paper clip into this hole. 3. High-resolution Digital Display with Backlight: The backlight can always be turned on or off after a [...]
45.64 $ Add to cart{ float: left; width: 944px; border: 1px solid #666666; margin-bottom:10px; } .posterContainer { width: 900px; height: 180px; margin: 20px; border: 1px solid #666666; background-color: #ffffff; overflow: hidden; } .posterContainer .imageSlide { width: 2700px; animation: switch 5s ease-out infinite; } @keyframes switch { 0, 25 { margin-left: 0; } 35, 60 { margin-left: -900px; } 70, 100 { margin-left: -1800px; } } .posterContainer .imageSlide:hover{ paused; } .posterContainer .posterImage{ width:900px; float:left; } .productContainer { float: left; width: 902px; margin: 0 20px 20px 20px; } .productContainer .productItem { width: 210px; float: left; margin-right: 18px; border: [...]
45.00 $ Add to cartMain Feature: ● Ultra-portable tools for advance electricians. The DC AC current can be tested quickly, accurately and safely without damaging the insulation on the line surface. ● The ACM81/92/91 series of clamp meters have True-RMS characteristics and 1 mA Resolution . Has Dual impedance test voltage. Can effectively meet the needs of professionals. ● The BSIDE series of clamp meters is equipped with different test functions. Two colors Blue and Black. Meet the needs of different customers at a more affordable price. ● Maximum display: 6000Counts. Compared with similar products,The ACM92/91 still has 1mA accuracy for a larger measurement range 0~6A. ● The Automatic-Range [...]
71.31 $ Add to cartbody { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
75.68 $ Add to cartMultifunction Hand Grip Glass Tile Cutter Cutting Craft Kit Hand Tools Machine Quick Opening Set Features:1.Easily cut glass and ceramic tiles, allowing you to make functional art.2.Designed for glass tile, quick break, save time and effort.3. It can save time and effort, and break strong. 4. The product has excellent quality and durability. 5. Ergonomic design,comfortable to color may be slightly different from the image due to different monitor and light effectPlease allow 1-3cm deviation due to manual thickness: 3-15 mmScope of application: glass, ceramic tile Package [...]
47.69 $ Add to cartHeatbreak Tube 3D Printer Throat Tube Wear Resistant for Ender 3 S1 Pro Feature: 1. Applicable Models: This throat tube is suitable for Ender 3 S1, Ender3 S1 Pro, for CR 10 Smart Pro, for Sermoon V1, V1 pro 3D printer, check the model!2. Delicate Craftsmanship: The inner wall of this tube is smoothly without ink blocking, and the pumping resistance is small, providing stabler and smoother using.3. Ti Alloy Material: This tube made of Ti alloy is corrosion resistant, high temperature and wear resistant, strong and sturdy, ensures a long life span.4. Branch Design: Adopts branch design, [...]
52.04 $ Add to cartProduct Description Industrial Exhaust Fan Heavey Duty & Portable Handle & Low Noise This utility blower extractor fan is used for intake or exhaust, depending on which end the hose is connected to intake or outtake. It is the ideal ventilation fan for factories, basements, shipyards, farms, grain storage, warehouse, kitchen, office, workshops, tobacco, tunnel, automobile manufacturing, and more places requiring ventilation. Pure Copper Motor Large Air Flow Flexible PVC Ducting Sturdy & Humanized Design Tough Equipment & Tools, Pay Less VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivatedemployees, VEVOR is [...]
235.40 $ Add to cartbody, div, ul, li, ol, h1, h2, h3, h4, h5, h6, input, textarea, select, p, dl, dt, dd, a, img, button, form, table, th, tr, td, tbody, article, aside, details, figcaption, figure, footer, header, menu, nav, section { margin: 0; padding: 0; box-sizing: border-box; } .clearfix:before, .clearfix:after { content: ; display: table; } .clearfix:after { clear: both; } @font-face { font-family: iconfont; src: src: / x IE6-IE8 x / formatwoff, formattruetype, / x chrome, firefox, opera, Safari, [...]
327.96 $ Add to cart3 in 1 Corner Rounder Punch 3 Way Corner Cutter for Paper Craft Laminate DIY Feature: 3 in 1 Corner Rounder Punch: Create perfectly finished paper crafts or scrapbooks with 3-way corner cutter. Designed to punch three different corners, this corner punch is the perfect tool for giving some extra vitality to your creations. Widely Application Corner Cutter: It is simple to use and will make crisp, perfect cu t-outs from cardstock, scrapbook paper, vellum and more. Suitable for cutting paper, photographs, scrapbooking, business cards or gift card. Small corner rounder punch is suit for [...]
51.89 $ Add to cart3D Printer Throat Tube Wear Resistant Heatbreak Tube for Ender 3 S1 Feature: 1. Applicable Models: This throat tube is suitable for Ender 3 S1, Ender3 S1 Pro, for CR 10 Smart Pro, for Sermoon V1, V1 pro 3D printer, check the model!2. Delicate Craftsmanship: The inner wall of this tube is smoothly without ink blocking, and the pumping resistance is small, providing stabler and smoother using.3. Ti Alloy Material: This tube made of Ti alloy is corrosion resistant, high temperature and wear resistant, strong and sturdy, ensures a long life span.4. Branch Design: Adopts branch design, this [...]
51.84 $ Add to cartbody { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
62.91 $ Add to cartDescription: Pure copper bells are durable and have a pleasant ring tone Easy to install, can be loaded into the Airtag, positioning bike, anti loss Waterproof sealing ring, waterproof and shockproof, protect Airtag. Specification: Suitable for: handlebars with diameter of about 22.2mm. Size: 39 x 49 x 56 mm. Material: Pure copper, plastic. Quantity: 1 set. The package includes: 1 x Bicycle Airtag locating anti-theft bell. 1 [...]
41.23 $ Add to cart✅ NOTE: Only for airtag tracker bike mount, no locator. Description: Bicycle special AirTag bracket protective cover, ABS material shell just to accommodate an AirTag, strong and wear-resistant, not easy to damage Equipped with special screws and inner six flower tools, it cannot be unscrewed with ordinary tools, even if it is found, it is not easy to destroy and anti-theft is safer Can be mounted with the bottle cage at the frame and improves concealment Specification: Material: ABS Size: Approximately 77mm x 39mm x 11mm Color: Black Quantity: 1 set bracket X1 + silicone ring X1 [...]
41.23 $ Add to cartSmart 18650 Charger 3 Slots 4.2V Li-ion Battery USB Independent Charging 18650 18500 14500 16650 26650 Lithium Battery Charger Features: The 3 slots are charged independently without interfering with each other. Two-color charging indicator, red light when charging, green light when fully charged. The charging cut-off voltage is 4.23V, and it will automatically stop when fully charged without overcharging. Specifications: Product Name: 18650 Charger Three Slots Product Model: BH-042100-03U Input voltage: DC 5V 1-2A Output voltage: DC 4.2V 1000mA Product size: 70 x 25 x 125mm Product weight: 94.5g with packaging Features: Compatible with 10440, 14500, 16340, 16650, 18350, [...]
40.71 $ Add to cartDescriptions:As long as the spring is turned, bunny jump toys will jump and walk.Just need to turn the hopping bunny toys spring, and the rabbit will swing its head and walk forward.Windup bunny is constructed from pp Product name: Spring chain jumping rabbitProduct material: ppProduct size: 4 x 6.5 x 12.5cm/1.57 x 2.55 x 4.92inProduct List: Bunny Jump Toy x 1See more product details1.Rotatable Head: Just turn the spring, bunny jumping toy will jump away from the toy. It will make a clicking sound when the head is automatically turned.2.No Need for Battery: Simply turn the spring of the [...]
41.11 $ Add to cartKids Bath Toy Clockwork Wind Up Inflatable Boat Ship Play For Water Bathroom Bath Toy Inflatable Boat Baby Outdoor Water Toys Bullet Points: 1、【High-quality Material】Yacht Bath Toy is made of ABS, with high-quality and high performance, is a good toy for kids to play in the bathtub or swimming pool, it can increase the fun for kids. 2、【Clockwork Bath Toy is propelled forward by the clockwork motor, twist the clockwork to rotate clockwise, put them into the water, and they will swim forward. 3、【Easy to Install】Yacht Toys is very easy to install, just open the inflatable cover first, then [...]
41.16 $ Add to cartDescription: specification: Product name: Automatic watering and slow-release dripper Material: Preferred environmental protection PPP plastic Dimensions: 4.4 cm x 16 cm Color: light Maya, mint green, light pink Application: flower gardening, plant watering Specifications: Suitable for all kinds of flowers and bonsai Simple operation, integrated dripper, more convenient to use The bottle is universal, most of the beverage bottles or mineral water bottles can be used Package Included: 3pcs [...]
41.73 $ Add to cart3pcs Dust-proof Plugs Battery Charging Port Cover Protector Cap Silicone for DJI Mini 3 Pro Flight Batteries Accessories Features:1. Fully enclosed design dust cover, anti-scratch and anti-scratch safety upgrade.2. Prevent oxidation short circuit, so as to avoid battery contacts exposed to moisture and oxidation for a long time.3. Dustproof, waterproof and foreign matter prevention, to prevent conductive particles from entering the battery contacts and causing a short circuit.4. Soft silicone material, will not scratch the contacts, and fit closely with the interface.5. Anti-tear, no deformation, Name: Full Surrounding Battery Dust CoverModel: MM3-DC405Applicable models: Mini 3 ProMaterial: 3 packsNet [...]
45.71 $ Add to cartBRAND NEW MR9 PX625 Battery Converter Adapter The ideal solution for many cameras such as the Olympus OM1, Rollei 35, Canon F1, Yashica 124G, etc that used the original PX625 1.35V battery. But will not fit Leica M5 Todays equivalent to the PX625 battery is the PX625U. It is the same size and shape, but the voltage is 1.55v - which means that the battery will give an over-voltage and would give incorrect meter readings. One of the solutions is to buy a Weincell PX625 Battery, which at around £ 6.99 can make running your camera [...]
48.23 $ Add to cartKINGLUCKY c18 sound card integrated live broadcast equipment mobile phone indoor and outdoor Bluetooth recording karaoke speaker Brand: KINGLUCKY Model: c18 Microphone type: capacitance Applicable target: live broadcast crowd Display screen: none Yes Wireless: No Pointing feature: cardioid pointing Channel: 2 Input voltage: 220V Package list: audio card instructions, live line, accompaniment line, charging line Intelligence type: intelligence is not supported Whether APP is supported: Yes Shell process: abs Built-in battery capacity: 1200mA - 2000mA Endurance: 6-8 hours Signal-to-noise ratio: [...]
126.00 $ Add to cartUSB cable Features: Input:5V 2-4A Output:7.6V-8.4V Conversion efficiency:92 DC-DC Efficient conversion rate USB plug length:150cm Note: 1.In order to make your camera work better,please use a high-quality mobile power, mobile power bank is output guarantee of at 5V 2A to 4A current. When the power isnt enough, will not start or cant shoot properly, recommended that a separate USB power supply interface current is 2.4A, 3A will be better. 2.Turn off the smart sleep mode of the power bank and camera, or extend the camera standby time setting to unlimited. 3.Dont use the computer USB [...]
49.49 $ Add to cartUniversal Headphone Durable Holder Hanger Wall Hook PC Monitor Headset Holder Stand Rack Feature: - Quantity: 1PC - You can also put other accessories on this holder, such as cables, adapters and so on. - Simple design, small in size and light in weight. - Strong stickiness of the 3M sticker can promise the sticker firmly attach on the PC monitor or smooth wall. - It will make your computer desk cleaner and more tidy. - 100 brand new and high quality. - Prevents your headphone from scratching, pressing and other unwanted damage. - The headphone is [...]
40.31 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.