Homemade Brew Beer Wine Fermentation Check Valve AirLock Water Sealed Wine Plastic Exhaust Valve Eco Friendly Distiller Tool

Description

100 Brand New And High Quality
Material: Plastic
Color: transparent white

Size: 17cm in length, outer diameter of lower end 1cm
Conversion:1inch=2.54cm, 1cm=0.393inches

Applicable Pure juice fermentation, such as white grape, mead fermentation, etc.; secondary fermentation of red wine, etc.;

Usage method Fill the exhaust valve with water and insert it on the lid of the brewing barrel, or on the rubber plug or silica gel plug on the top of the fermentation vessel, and cover the small lid with holes on the one-way valve. The bubbles produced during wine fermentation are discharged to the outside of the barrel through the exhaust valve, so that the fermentation status of the wine in the brewing barrel can be observed.

Principle The single valve uses the principle of water seal, which can effectively isolate the fermentation medium from oxidation by outside air. The whole fermentation process is automatic fermentation and exhaust at room temperature, without manual control, easy to use, simple to operate , and can be reused for a long time.

Function Used with a perforated rubber stopper or a silica gel stopper, it can effectively isolate the air during the secondary fermentation period for red wine fermentation, and at the same time emit carbon dioxide; for the alcohol fermentation of mead, white wine, and milk wine. Prevent oxidation

Pictured I have a lid on the top, so I’m not afraid of fruit flies.

Warm Tip: Please be reminded that due lighting effects, monitor's brightness/contrast settings etc, there could be some slight differences in the colour tone of the website's photo and the actual item.Item Measure by hand, it could be 1cm different, your kind understanding will be much appreciated.