Description
CCTV Camera Tester Monitor
IV8W——5inch tester+8MP AHD+8MP CVI+8MP TVIwith HDMI and VGA
IV8C——5inch tester+8MP AHD+8MP CVI+8MP TVIwithout HDMI and VGA
IV5——5inch tester+8MP AHD+8MP CVI+8MP TVIwithout HDMI and VGA
This CCTV tester not supported Digital Multimeter , can not test IP camera .
Product overview
The new HD coaxial tester is developed for the on-site installation and maintenance of HD coaxial camera, having TVI, AHD,CVI. It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data searching, cable testing, LED lamp etc.
Product Funtions
Video signal testing
Vedio monitor tester, High-resolution 5.0 inches 800 RGB x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality.
PTZ controller
Video monitor tester built-in Pelco-D / P PTZ control protocol, etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus, aperture size.
Image generator
Multi-format video OUT port image generator, sending a variety of standard e.g. PAL, NTSC color graphics section
DC12V 1A output power
Power the camera with DC12V 1A power output from the tester. It is helpful for demo and testing when the power supply is not available
Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
Enhanced network cable testing
By UTP CABLE TEST port on the meter, you can test the connection of network cable.
VGA/HDMI input
Support VGA/HDMI 1.0 video input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode. The maximum resolution is
1920 x 1440IV8W / 1920X1080 IV8S
TVI camera test
HD TVI video surveillance testing, support
1MP 2MP 3MP 4MP 5MP IV8W
/
720p 25, 30, 50,60fps/ 1080p 25,30fps IV8S
. When TVI signal input, the tester will display HD TVI camera image.
AHD camera test
HD video surveillance testing, support AHD 2.0 version,
1MP 2MP 3MP 4MP 5MP IV8W /
720p 25,30fps/ 1080p 25,30fps IV8S
. When AHD signal input, the tester will display the AHD camera image.
CVI camera test
HD CVI video surveillance testing, support
1MP 2MP 3MP 4MP IV8W /720p 25, 30, 50,60fps/ 1080p 25,30fps IV8S
. When TVI signal input, the tester will display HD TVI camera image.
LED lamp
It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.
The battery graphic display
The tester has advanced power control and protection circuit, low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours.
Package HD coaxial tester
Adapter DC5V 1Awith USB cable
International Standard 18650 2600ma battery
BNC cable
RS485 connector
Power output conversion cable
Audio cable
Lanyard
Tool bag
Instruction Manual
CCTV Camera Tester
NEW – IV8W : Support CVBS + AHD 8MP + TVI 8MP + CVI 8MP Camera
Product overview
The new HD coaxial tester is developed for the on-site installation and maintenance of HD coaxial camera, having TVI, AHD,CVI. It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data searching, cable testing, LED lamp etc.
Specifications:
Model
IV8W
LCD screen
5.0 inch TFT-LCD, 800RGBx 480 resolution
Video test
NTSC/PAL Auto adapt
LCD adjustment
Brightness, Contrast, Saturation adjustable
Video IN/OUT
1 channel BNC Input & 1 channel BNC Output
VGA/HDMI input
Max support 1920X1080 video input
PTZ Controller
Support RS485
PTZ Protocol
Compatible with protocols PELCO-D/P,
Baud Rate
Baud Rate: 600,1200, 2400, 4800, 9600, 14400bps
Color bar generator
Support both PAL / NTSC formats standard color bar output
Red, Green, Blue, White, Black, Grey and testing image output
UTP Cable Test
Display UTP cable connection status , cable type and
the sequence of wires as well as read the number of the test box.
DC12V power output
Output DC12V1A power for camera
Audio input test
1 channel audio signal input
Coaxial HD test
TVI test
1 channel TVI inputBNC interface,
support 8MP
CVI Test
1 channel TVI inputBNC interface,
support 8MP
AHD Test
1 channel AHD input BNC interface,
support AHD 2.0 version, 8MP
POWER
Power Adapter
DC 5V1.5A
Battery
Built-in 18650 2600mA battery X 2,
After charging 3-4 hour, working time lasts 11 hours
General
Language
English and Chinese optional
Working Humidity
30-90
Dimension
194mm x 112mm x 48mm / 540g
Product Funtions
Video signal testing
Vedio monitor tester, High-resolution 5.0 inches 800 RGB x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality.
PTZ controller
Video monitor tester built-in Pelco-D / P PTZ control protocol, etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus, aperture size.
Image generator
Multi-format video OUT port image generator, sending a variety of standard e.g. PAL, NTSC color graphics section
DC12V 1A output power
Power the camera with DC12V 1A power output from the tester. It is helpful for demo and testing when the power supply is not available
Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
Enhanced network cable testing
By UTP CABLE TEST port on the meter, you can test the connection of network cable.
VGA/HDMI input
Support VGA/HDMI 1.0 video input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode. The maximum resolution is 1920 x 1440IV8W / 1920X1080 IV8S
TVI camera test
HD TVI video surveillance testing, support 8MP IV8W / 720p 25, 30, 50,60fps/ 1080p 25,30fps IV8S. When TVI signal input, the tester will display HD TVI camera image.
AHD camera test
HD video surveillance testing, support AHD 2.0 version, 8MP IV8W / 720p 25,30fps/ 1080p 25,30fps IV8S . When AHD signal input, the tester will display the AHD camera image.
CVI camera test
HD CVI video surveillance testing, support 8MP IV8W / 720p 25, 30, 50,60fps/ 1080p 25,30fps IV8S. When TVI signal input, the tester will display HD TVI camera image.
LED lamp
It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.
The battery graphic display
The tester has advanced power control and protection circuit, low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours.
Packaging list
1 x HD coaxial tester Built-in battery
1 x Adapter DC5V 1Awith USB cable
1 x BNC cable
1 x RS485 connector
1 x Power output conversion cable
1 x Audio cable
1 x Lanyard
1 x Tool bag
1 x Instruction Manual
IV8C CCTV TESTER
Utp Cable Test 5 Tft Lcd Screen Cctv Tester Built-in 18650 Battery IV8C 720P 1080P Hd Surveillance Camera Tester Cctv Test
not support VGA/HDMI input
IV8C support CVBS + AHD 8MP + TVI 8MP + CVI 8MP Camera VideoTest:
1 AHD Signal test: 8MP 1080P 720P;
2 TVI Signal test:
8MP 1080P 720P;
3 CVI Signal test: 8MP 1080P 720P;
Product overview:
The new HD coaxial tester is developed for the on-site installation and maintenance of HD coaxial camera, like TVI,CVI, AHD,Analog, CVBS. It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, RS485 data searching, cable testing, LED lamp etc.
Main Features:
x Build in High-resolution 5.0 inches 800 RGB x480 wide viewing angle display,
x Support PAL/NTSC standard video signal. CVBS testing.
x PTZ controller
Support Pelco-D / P PTZ control protocol, etc. , through RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus, aperture size.
x Image generator
Multi-format video OUT port image generator, sending a variety of standard e.g. PAL, NTSC color graphics section
x DC12V 1A output power
Power the camera with DC12V 1A power from the tester.
x Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
x Improvement cable test
UTP cable, telephone cable etc order and connectivity test, can save testing report
x TVI camera test
HD TVI video surveillance testing, support
8MP
. When TVI signal input, the tester will display HD TVI camera image.
x CVI camera test
HD CVI video surveillance testing, support
8MP
. When CVI signal input, the tester will display HD CVI camera image.
x AHD camera test
HD video surveillance testing, support
8MP
. When AHD signal input, the tester will display the AHD camera image.
x LED lamp
It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.
Specifications:
Model
IV8C
LCD screen
5.0 inch TFT-LCD, 800RGBx 480 resolution
Video test
NTSC/PAL Auto adapt
LCD adjustment
Brightness, Contrast, Saturation adjustable
Video IN/OUT
1 channel BNC Input & 1 channel BNC Output
VGA/HDMI input
NOT Support
PTZ Controller
Support RS485
PTZ Protocol
Compatible with protocols PELCO-D/P,
Baud Rate
Baud Rate: 600,1200, 2400, 4800, 9600, 14400bps
Color bar generator
Support both PAL / NTSC formats standard color bar output
Red, Green, Blue, White, Black, Grey and testing image output
UTP Cable Test
Display UTP cable connection status , cable type and
the sequence of wires as well as read the number of the test box.
DC12V power output
Output DC12V1A power for camera
Audio input test
1 channel audio signal input
Coaxial HD test
TVI test
1 channel TVI inputBNC interface,
support 8MP
CVI Test
1 channel TVI inputBNC interface,
support 8MP
AHD Test
1 channel AHD input BNC interface,
support AHD 2.0 version, 8MP
POWER
Power Adapter
DC 5V1.5A
Battery
Built-in 18650 2600mA battery X 2,
After charging 3-4 hour, working time lasts 11 hours
General
Language
English and Chinese optional
Working Humidity
30-90
Dimension
194mm x 112mm x 48mm / 540g
Packing list:
HD coaxial tester
Adapter DC5V 1Awith USB cable
International Standard 18650 2600ma battery
BNC cable
RS485 connector
Power output conversion cable
Audio cable
Lanyard
Tool bag
Instruction Manual
IV5
support CVBS + AHD 8MP + TVI 8MP + CVI 8MP Camera VideoTest:
IV5 support :
8MP
camera tester ,
5 Inch
HD Screen resolution 800 x 480,Support 8MP AHD + 8MP TVI + 8MP CVI / CVBS Video tester ,
UTC
HD coaxial control,BNC coaxial control PTZ,But cant call the camera menu information and RS485 and UTP Function .
Reviews
There are no reviews yet.